CHARISMA FASHION INDIA

What a Strike-Off Is in Embroidery — and When a Designer Should Ask for One

By the Charisma Fashion India team · Mumbai · November 21, 2026

The short answer: A strike-off is a production-intent trial of an approved embroidery design, stitched on the actual production fabric, with the actual materials and build, so colour, density, and hand-feel can be approved exactly as bulk will be made. Our Mumbai atelier recommends a strike-off whenever the fabric, colourway, or scale changes after the original sample was approved.

Our Mumbai atelier has developed hand embroidery since 2000, from Masjid Bunder, with a sales representative in Dallas, TX. This guide clarifies a step that is often confused with sampling, and it pairs with our guide to the sampling process from tech pack to approved swatch. Houses researching this topic may also wish to see our flagship guide to hand embroidery in Mumbai.

1. Strike-off versus sample swatch: the difference

A sample swatch answers a design question: can this artwork be interpreted in these techniques and materials to the effect the designer wants? It is often stitched on a substitute ground, at a convenient size, while colours and densities are still moving. A strike-off answers a production question: does the already-approved design work, unchanged in intent, on the real fabric, in the real colourway, at the real scale, built exactly as production will build it? The distinction matters because many expensive surprises live between those two questions — a design approved on white cotton can sit differently on ivory silk, and a motif approved at sample scale can crowd a smaller production panel.

In our workshop a strike-off is not a second sample and it is not charged or scheduled as open-ended development. It is a defined verification step with a defined outcome: approve, or name the specific adjustment needed before bulk begins. Keeping that boundary clear protects the designer's timeline as much as the atelier's.

2. What a strike-off is stitched on — and why it matters

A proper strike-off uses the production ground fabric, from the production dye lot where possible, the reserved production materials, and the final backing and finishing method. Each of those choices changes the result. Ground colour shifts thread and bead colour; a sheer ground needs a different backing decision from an opaque one; pile, slub, and weave change how stitches sit and how light moves across sequins and stones. Stitching the strike-off on anything else reintroduces the guesswork the step exists to remove.

Size matters too. Where the full panel is large, a strike-off should still include one complete motif repeat and one edge or border section at full scale, so spacing, grading, and finishing are all visible in their real proportions. A small corner cut from different fabric proves very little, and our team will say so rather than let a weak strike-off stand as approval.

3. When a designer should ask for one

Ask for a strike-off when the ground fabric changes after sampling, when a new colourway is added, when a design moves to a different garment or panel size, when materials are substituted for availability or cost, or when a repeat order returns after a gap and new material batches are involved. In each case something material has changed since approval, and the strike-off is the cheapest point to discover its effect. It is also worth asking before a large or heavily embellished bulk run even when nothing has changed, simply because the cost of the step is small beside the cost of correcting finished panels.

A strike-off is usually unnecessary when production follows sampling immediately, on the same fabric and materials, at the same scale, from the same reserved batch — in that case the approved swatch already is the production standard. A good atelier will tell a designer when the step can be skipped, not sell it by default.

4. What to check when the strike-off arrives

Check the strike-off on the body or form if possible, not only flat, and in daylight first and then in the light the garment will be worn in. Compare it directly against the approved master swatch side by side: colour, density, motif scale, spacing, and the finish on the reverse. Then check the production-specific points the swatch could not prove — how the embroidery sits at seams and edges, whether the ground puckers under the final density, how the panel drapes and weighs, and whether the backing is comfortable and invisible where it should be.

Corrections at strike-off stage should be specific and few: a shade step in one material, a small spacing adjustment, a backing change. If the strike-off prompts a redesign, that is valuable information, but it should be named honestly as a return to sampling, with its own timeline, rather than absorbed as a minor tweak while the bulk deadline stays fixed.

5. How approval of a strike-off protects bulk production

Once approved, the strike-off joins the master swatch as a joint standard: the swatch governs the design, the strike-off governs the design on this fabric in this colourway. Production panels are checked against both, and materials are drawn from the batch the strike-off used. That pairing is what makes a later disagreement resolvable — there is a physical, approved reference for exactly what bulk was meant to match.

Our team keeps strike-offs labelled with style, fabric, colourway, and date, and retains them with the style's material record. For repeat orders, the retained strike-off is the starting point: a fresh strike-off is stitched only if a batch, fabric, or supplier has changed, and it is compared against the retained one before bulk proceeds.

Frequently asked questions

What is a strike-off in embroidery?
A strike-off is a production-intent trial of an approved design, stitched on the actual production fabric with the actual materials, backing, and build. It verifies colour, density, scale, drape, and finish exactly as bulk production will be made, before bulk begins.

How is a strike-off different from a sample swatch?
A swatch develops and approves the design itself, often on a substitute ground while details are still changing. A strike-off verifies that approved design on the real fabric and colourway at production scale. Sampling creates the standard; a strike-off confirms it survives production conditions.

When should a designer ask for a strike-off?
When the fabric, colourway, panel size, or materials change after sampling, when a repeat order uses new material batches, or before a large bulk run. If nothing has changed and production follows sampling directly from the same batch, an atelier should say the step can be skipped.

What should be checked on a strike-off?
Colour and density against the approved master, motif scale and spacing, behaviour at seams and edges, drape and weight, backing and reverse finish — viewed in daylight and in wearing light, ideally on a form as well as flat.

Developing a collection?

Request our swatch folder or start a sampling conversation with our Mumbai team — our team will walk through materials, timing, and process before you commit.
Start a conversation with our office · More from our journal
Contact: [email protected] · +91-22-23456087